YGK Sekinotter II

A bobbin holder that can be used for all types of root wrapping, from making assist hooks to chimoto root wrapping, sweetfish root wrapping, and tying.
The main material is POM resin, which is used for automobile parts and gears and has excellent slidability, impact resistance, and durability, and the latest cutting and polishing technology minimizes damage to our yarn. I will stop.

Wrap the attached bobbin with thread, thread, root winding thread, etc. so that it does not slip on the bobbin.
Loosen the screw and pull it out, then expand the lower part of the main body arm appropriately and remove the bobbin.
At that time, please note that the blue sleeves attached to both sides of the bobbin will fall off.

Adjust the tension only with the tension screws on both sides of the attached bobbin without wrapping it around the arm.
If you need to adjust the tension to the minimum, attach the attached ring sticker to the knurled part on the side of the bobbin.

* Caution
-If the screw is turned too much, it will come off. Also, looseness may occur during use.
・ After use, keep out of reach of children.
・ Be careful where you put the parts to prevent accidental ingestion of parts such as those with dementia.
・ Do not use for anything other than root wrapping.

◆ Unit weight: regular 18g