TOOL 759-1 System Stick Blue

An assist tool that greatly reduces the effort required to assemble knots in the field. Ideal for building friction knots, especially "FG knots". Since the system stick is used by fixing it to the vest or bag, both hands can be used freely, allowing tight weaving while tensioning the main line. We have created an efficient and simple mechanism that has been carefully thought out for use in the field. ~ Braid ~Since the system stick can be fixed to the vest or bag with a carabiner or eggplant, and the PE line can be fixed with a rubber pad, the leader can be woven with both hands.You can knit while applying tension to the main line, so tight knitting is possible.*Be careful not to apply too much tension. ~Tightening~ When tightening the knot, remove the stick, and wrap it around the rubber part of the stick body with PE line etc. to tighten it securely.*When tightening, be careful not to cut your hand on the line. *The tightening force with the friction knot is reflected in the strength of the completed system.If tightening is loose, the system strength will drop significantly, causing breakage and slipping out. Make sure that tightening is close to the line strength limit. ?Half hitch?When finishing a knot with a half hitch, you can hold the line tension while holding the line tension by fixing the leader with the rubber pad.Even after cutting with a half hitch and finally cutting off the main line branch, the leader is fixed on the stick, so there is no need to be bothered by the wind.