FOR THE BEAST is a rod that focuses only on the size of monsters in the field .
Lineup from 7power focusing on big bait.
It is a rod for pursuing huge fish and record fish that you have not seen yet.

FOR THE BEAST 73XXXH UNLIMITED :

Designed only to release giant bait well over 300g high in the sky and hook up monsters that have grown huge.

Compared to big bait rods in the late 7ft to 8ft class designed with long casting in mind, by setting the total length to 7ft3inc, we focused on weight reduction, torque, and handling. As a result, the most technical and well-balanced rod was born here.

Also, by setting it to 7ft3inc, fatigue during casting with a long rod is reduced. As a result, the swing is light, and it is possible to cast a giant bait over 20oz long, and it is possible to use technical approaches such as jerk.
In addition to direct 50lb nylon and fluoroline, guides are assumed to use up to pe100lb + leader 120lb, titanium frame double hood guide #8 is the main 9 guides, and the guide at hand is the level of a large bait reel. I used a #12 high frame guide to match the height of the winder. This improves long casting performance when using a thick line and minimizes leader troubles caused by FG knots.

In addition, for the grip part, we adopted the ANTI-SLIP SHAPE DESIGN (PAT.P) that was decided to be adopted from the 2022 model FTB model.
This new grip design, which does not require any sound absorbing material such as EVA or cork, can transmit 100% power to the blank without slipping even when gripped with wet hands, allowing the movement of the giant bait in the water. It will tell the angler exactly.
~FOR THE BEAST 73XXXXH UNLIMITED is for real giant bait anglers chasing their dreams~

01 Monocoque carbon grip :

Monocoque carbon (hollow structure) grips are manufactured in-house for the front and rear grips, and laminated and crimped with elastic tubes. The highly rigid and highly sensitive carbon grip accurately conveys the state of the water and the movement of the lure to the angler.

02 One & half :

Both PARADOX and FTB series are designed with one and half structure. It uses different carbon elastic moduli for the tip and butt sections to create a flexible and delicate tip, as well as a tough and lifted bad section.
The clearance of the joint part is 9 to 10 mm.
If you insert it any further or if it is loosely inserted, it is more likely to be damaged.

03 Reel Seat :

ECS is used for FOR THE BEAST

04 Guide :

FOR THE BEAST are all double foot specifications.

05 The shine of the rod :

Since the ID rod is sand (paper), the blank has a shiny pattern. Basically, the ID rod is made of 0 ° and 90 ° carbon. When producing this blank, we will scrape the surface of the carbon. At that time, since the carbon fibers of 0 ° and 90 ° have different directions, the light direction is different and it looks like unevenness, but there is no problem in use.
It can be painted and hidden, but we dare to make it unsanded with an emphasis on lightness and sensitivity.
Thank you for your understanding.