AVAIL MicrocastSpool 22ALD22R #Black

By replacing the genuine spool, it becomes easier to handle lightweight lures.
Depending on the balance of the rod and line used, it is possible to cast lures of about 1g used for light salt (such as horse mackerel) and area trout.
The brake can be adjusted by adding a magnet (sold separately).
When using MicrocastSpool 22ALD22R, additional magnets can be customized.
Since the Microcast Spool 22ALD22R is shallower than the genuine spool, the magnet in the genuine state is farther away from the spool and the brake effect is weaker than the genuine one.
If you want to strengthen the brake, you can strengthen the brake by attaching a set of 8 4 x 1 mm magnets (sold separately) or a single 4 x 1 mm magnet to the genuine magnet.

Precautions for use
- If you touch the spool rim when thumbing, friction may cause the anodizing to peel off.
When thumbing, hold down the thread winding surface.
- When winding the line, applying too much tension may cause damage. When winding a stretchy line such as a nylon line, wind the line loosely.
- Anti-rust grease is applied to the bearings at the time of shipment. After degreasing and cleaning, oil them before use.

About the characteristics of the micro cast spool
- To reduce weight, the micro cast spool is thinned to the limit of the necessary strength.
The hollow inside the spool is designed to be large to make the groove shallower, so the reel drive sound may echo inside the spool and sound louder.
- In order to reduce the weight of the spool, "super duralumin (aluminum alloy)" is used for the shaft material, so in order to prevent a decrease in strength, it is designed without an O-ring installation groove.
The O-ring has the role of suppressing the drive sound, so the slight drive sound generated by the absence of it echoes on the micro cast spool, making it easier to hear louder than the genuine spool.
Such sounds are not abnormal with the spool. Please use it with confidence when fishing.