MIYA EPOCH AT-3S

The reel senses the strength of the line tension and controls the winding under the best conditions.The fishing power control function allows the reel to detect the strength of line tension caused by pulling fish, shaking the ship, etc., and controls winding under the best conditions. You can set the stepping interval and pause time (upper and lower shakuri is not possible). Since it uses a multi-plate drag system, smoother sliding is possible. Although the body is small, it is equipped with a large motor to achieve high power with a maximum instantaneous hoisting force of 55 kg. Since the control lever is provided on the left side of the main body, drag adjustment is possible even when winding with the handle. * Note: AT-3S does not have a depth memory function.

Target fish (target fishing)

● Blue fishing such as yellowtail and amberjack
● Light swimming fishing such as amberjack
● Light deep sea fishing (Kinmedai Ara)
● Deep fishing such as demon scorpion fish and okoze
● Offshore rockfish and cod fishing on the Sea of Japan side

Product number		AT-3S
Power supply		DC-12V
JAN code (last 5 digits)		02531
Thread winding amount (No.-m)	No. 4-900m No. 5-800m No. 6-700m No. 8-550m No. 10-450m No. 12-350m
Maximum weight load		No. 300
Drag bearing capacity		20kg-40kg
Instant maximum hoisting force		55kg
Sustained hoisting power		16kg
Maximum hoisting speed / no load		10-150m / min
Manual winding gear ratio		1: 1.92
Current consumption		1.4-20A
Operating temperature		-10 ℃ -80 ℃
ball bearing		10 pieces
Reel own weight		2.1kg
Electronic control		Tsuriryoku control ON-OFF switch switching Dan引jerking, boat slip stop Slow Start Slow stop continuously variable transmission (pause, a very low speed - the maximum speed)
Safety mechanism		+ -Reverse connection prevention, overload stop control
Accessories		Handle, power cord
Reel size (W x H x Dmm)		240 x 150 x 220 mm

Fishing power control [PAT.] The winding speed is automatically controlled in response to the pull of the hit fish

High-speed automatic winding function By pressing and holding the automatic winding switch, the ship can be wound at the maximum speed to the ship slip stop position.

Step-pulling shakuri function Start any shakuri with a single switch. When the shakuri is finished, it is automatically wound up to the stop position.