LSD 3M Cutting Reflective Sticker "LSD Logo" M White

A cutting sticker recommended for cars, coolers, container boxes, etc.
3M strong adhesive & reflective type that is easy to find even in the dark.

* Weather resistance period: Approximately 6 years (reflection performance approximately 3 years)

========================================
How to attach stickers (for 3M reflective stickers) )

Things to prepare: Wes, etc. ・ Squeegee (spatula) (It is convenient to have scissors and masking tape)

1. Wipe the surface of the pasted area clean.
2. Gently peel off the transparent film and the sticker body, and attach it from the edge.
3. After pasting, rub and crimp with a squeegee from above.
4. Gently peel off the transparent film while checking that the sticker body is stuck to the sticking surface.
========================================

* 3M Reflective sticker The sticker
body may come off from the transparent film depending on the storage environment (temperature, humidity, etc.) and work environment. Before sticking, rub the sticker body over the transparent film with a squeegee to make it transparent. Please attach the film and the seal body after crimping them again.

<Sticker size>
LSD logo M: H57mm x W136mm
SHARK M: H65mm x W140mm

<Material>
Polyvinyl chloride

<Caution>
* Do not use for any purpose other than stickers.
* If the sticking surface is uneven or distorted, the sticker body may not stick well.
* Do not use on the human body or other animals as it may cause irritation due to stickiness.
* Avoid using in water, high temperature and high humidity.
* The weather resistance period is a guide. Since it changes depending on the usage environment, we do not guarantee the usage period as described.