G-CRAFT Seven-Sense TR "Moss" <Afterstorm SWELL Special> MS-1102-TR

MS-1102-TR Afterstorm SWELL Special

Designed exclusively for blackfin seabass

Second generation 1102, titanium frame SiC ring guide single unit total weight 11.2g. Third generation 1102, titanium frame TORZITE ring guide single unit total weight 6.9g. The difference is minus 4.3g. 38.4% weight reduction. Second generation 1102, total rod weight 259g. Third generation 1102, total rod weight 192g (proto). The difference is minus 67g. 25.8% lighter. All the weight reductions that are possible at the moment have been made while keeping the moment. On top of that, the performance exceeds that of the second generation.

The tip of the second generation 1102 is full 30t and butt is 30t + 40t, while the tip of the third generation 1102 is 30t + 40t and the butt is 30t + 40t + 46t. Both tip and butt have improved "tension", "sensitivity" and "repulsive force". Regarding the mandrel taper, due to the design change of the inro, only the tip has been slightly increased, and the MAX lure weight has also increased by 5g to 45g, enabling more delicate and aggressive plugging than ever before. In order to clarify the difference in concept, in contrast to the "Northwest Special" that was developed on the assumption that it will be used in strong winds, the concept was narrowed down to "Uneri no Sarashi" with a wind speed of 8 m or less from no wind before and after the passage of low pressure. The taper is looser than the "Northwest Special", and it is a thick carbon blank, and it is designed to bend firmly and "continue to work". Therefore, there is no peaky at the time of casting, and the more you hit the pinpoint with stable accuracy and the ranker class, the more stable the bending of the butt, and the true performance of this blanks is utilized. We hope you will enjoy the vast swelling of swelling, which is the real thrill of rocky shore, in this "SWELL Special".

Based on the swell before and after the low pressure passage from no wind to a maximum of 8 m, the test was conducted with a northwest wind sarashi of about 8 m that does not even go to the blast. Mainly 12cm minnow, minimum is around 7cm 10g and 7g jig head worm can be used. Delicate tip that is not defeated by swell and jig 45g with pendulum. Designed a tough butt that bends without dullness and is lightweight and crispy with reduced disparity so that the feeling of security increases.

* For knots, tie them to the leader with friction knots that do not form bumps. The leader length from 1.5m (1 Hiro) to 1.0m (arrow pull) can be used with less trouble. It is recommended to cast the leader's binding part on the outside of the top guide. Long leaders are not recommended.

G-craft Original CARBON REEL SEAT : 

Mainly molded with high elasticity and low resin carbon. Ultra-lightweight G-Craft original carbon reel sheet with machine cut. Equipped with a variable seat that allows you to freely change the seat position.

TITANIUM GUIDE : 

Equipped with Fuji Industries' ultra-lightweight torzite ring and all-titanium K guide.

G-craft Original SPIGOT JOINT : 

G-Craft original spigot joint that has been used since the release of Seven Sense. Designed to keep the tone by reinforcing the joint part with plain weave carbon.

GRIP DESIGN : 

Ultra-lightweight G-Craft original carbon reel seat & high-density EVA grip.