G-CRAFT Seven-Sense TR Monster Surf <Openarea NIMBLE Special> MSB-1052-TR

[ 1st generation 1052 light "bait" special]

Designed specifically for open ocean surf

The first "NIMBLE BAIT SPECIAL" was completed with a new blanks design exclusively for baits. The concept and mandrel are shared with spinning, but the "bending position" of the blank is designed exclusively for bait. Strictly speaking, the bait is harder near the tip, and the butt bends lower. In other words, a crunchy torso. If you just write the torso condition, you may think, "Hmm, is it dull?", But that's not the case. After all, there are 40t on the tip and 46t on the butt. It cannot be soft. In short, casting is not fun at all if the butt is full, so if you cast the best lure weight iron plate system 26g, the hard tip will immediately shift to the butt, bend firmly, and rebound. Lures, lines, rods, reels, and knobs, all of which bring sensitivity information to the bait "in your hand", you can experience the operability of a different world from spinning. Once you get used to it, baits that can be operated more than lever brakes are almost non-existent. It is impossible to take apart a hooked fish. 

Because it adopts a taper that is earlier than MSB-1072-TR, more delicate control is possible. Even if it's the first condition, it can be performed sharper because the body is firmly accumulated when casting, but the allowable range of various lures is narrower than MSB-1072-TR, but for that reason, it can be used for a certain layer of lure weight. The feeling is greatly improved, and "lightness" and "comfort" are increased. The best lure weight is 15g to 26.5g for plugs, 14g to 21g for jig worms, and 28g to 42g for jigs. Sinpen can be used from 28g to 38g. The recommended number of PE line is 1.2, but if you give priority to preventing high cuts, due to the characteristics of the bait, even if you use thick thread, the flight distance will not change significantly unless there is a strong crosswind. There is no problem with PE1.5. We recommend using a reel with a winding length of 80 cm or more per rotation of the handle. For distance-seeking long-distance casters, we recommend a low profile to reduce the friction of the PE line. 

Aiming at large sea basses mainly on the surf facing the open sea, medium-sized minnows (120 mm to 140 mm), vibrations (21 g to 28 g), and around 30 g sinpen with reverse flow, etc. Standard flight distance of around 28 g in flow speed. A super lightweight power blank with repulsive force and tension is designed by adjusting the tip that is easy to handle with all lures , the taper that is easy to repel, and the 46t bending position that is easy to cast long distance.

* For knots, tie them to the leader with friction knots that do not form bumps.

The leader length from 1.5m (1 Hiro) to 1.0m (arrow pull) can be used with less trouble. 

It is recommended to cast the leader's binding part on the outside of the top guide. 

Long leaders are not recommended.

G-craft Original CARBON REEL SEAT :

Black special non-slip paint + carbon sleeve mounting The ultra-lightweight duralumin G-Craft original lock nut is mounted on the reel seat.

TITANIUM GUIDE :

Equipped with an ultra-lightweight torzite ring made by Fuji Industries and an all-titanium guide.

G-craft Original SPIGOT JOINT :

G-Craft original spigot joint that has been used since the release of Seven Sense. Designed to keep the tone by reinforcing the joint part with plain weave carbon.

GRIP DESIGN :

Ultra-lightweight G-Craft original reel seat & high-density EVA grip.