EVERGREEN X-Over #362 Cold Shad

[Shad shape body]

A thin body with a high body height. The side is composed of a delicate curved surface like bait fish, not a completely flat side.
▪ At the time of action, a mild afterimage and wave motion are generated while the blinking is conspicuous and the water is moved firmly.
▪ When twisting the body, move the water a lot and at the same time emphasize the visual shape change. (It looks like thick → thin from the side, thin → thick from the bottom)
▪ Even if you stop it, the rolling will continue with a lingering sound.

[V shape belly front]

V belly shape like a hull boat.
▪ Coexistence of straightness that cuts through water and instability that makes it easier to roll.
▪ The edge effect separates the side of the body (upper part) and the abdomen (lower part), emphasizing the change in color vision during action.

[V-Shape Belly Rear]

A unique shape with the lower rear part of the body scraped off into a V-shape with a tighter angle. By changing the flow of water along the body when swimming, it creates a slight wobbling of the tail.

[Slim tail]

The tail is narrowed down to the tall body.
▪ Reduces resistance during casting, stabilizes flight attitude and increases flight distance.
▪ Suppresses the action of shaking the tail excessively, and appeals naturally with smooth movement.

[Eye-integrated molding / low center of gravity main weight]

In order to efficiently lower the center of gravity in the smallest space, we designed an eye-integrated molding weight.
▪ Achieves stable, small and high pitch rolling action.
▪ Demonstrates good response to quickly recover after falling down by hitting a jerk or an object.
<In the case of insert plate collar>
The internal space (especially on the ventral side) is expanded to reduce unnecessary ribs. Flashing efficiency is improved by increasing the area of the insert plate.

[Distributed sub-weights]

Two sub-weights are installed slightly behind the body.
▪ The posture during casting is stable and the flight distance is increased. A shad-shaped body that is hard to fly, and a fixed weight that emphasizes action, yet achieves stress-free castability in actual battles.
▪ With a natural swimming posture that is close to horizontal, the tail swing is suppressed from becoming large and unnatural.
<Completely fixed weight / silent specification>
Both the main weight and sub weight are completely fixed design. Silent specifications that are less likely to generate sound, coupled with tight action that suppresses hook noise.

[Hybrid shape]

A mixed type of round, coffin, and square that supports a wide range of situations from the middle layer to the bottom.

[Step]

Despite its wide shape, the base is narrowed down and steps are installed on both sides.
By letting the water escape momentarily while firmly grasping the water, stability and instability coexist and the following movements are arranged side by side.
▪ Small and high pitch, but smooth movement instead of hard movement.
▪ Action to lightly dodge roots and rebuild when hitting the bottom or objects.
▪ The movement to twist the body with a light force to reduce the burden on the wrist that is common in jerk bait.

[90mm body, # 6 x 3 hook specifications]

3 hook specifications that do not miss the fluttering bite and bite per body that tend to occur in jerking. In order to reduce the probability of disassembling even a little, the hooks of # 6 size, which is one rank higher than the lure size, are adopted, but the hooks do not get entangled with each other.

[Short shank / wide gap hook]

Equipped with a high-strength treble hook that is easy to hook and does not easily come off, and a short shank type (fluorine coat) of treble magic. Short shank # 6 size that eliminates hook entanglement and is safe even during fighting.

[Upward tail eye]

The tail eye is installed slightly upward on the diagonally cut tail. Increase the distance between the tail hook and the center hook to eliminate elements that interfere with each other.

Product package :