DAIICHISEIKO Kyutaro?

A rod holder that attaches tightly anywhere.Incorporating an ultra-strong vacuum suction cup that sticks fast to the desired position according to your fishing rod (e.g., a surf fishing rod, casting rod, or short rod) and target fish.A double suction cup type with great improvements in mounting strength.Possible to install the product in the desired position and set the rod holder angle freely.Even after the installation, the rod can be set upward or downward, depending on the position where the rod butt hangs.Suction cup size (one): 65 mm dia.Quantity: 2.Accessories: A set of holders dedicated to the Surf Ichiro and Sand Pole. Method of attachment to and detachment from cooler box : 1) Wipe off the dirt and moisture of the cooler box cleanly.2) Place a pair of suction cups in an appropriate position and loosen the rod holder bolts about 5 mm.3) Press each rod receiving part strongly and release the air inside as much as possible.4) Tighten the bolts securely while pressing the rod holder part.5) Apply the above method to all the four suction cups stick fast. Method of removal : Loosen each suction cup tightening part, insert a fingertip through the clearance of the suction cup, and remove the suction cup.Precaution:Rough or uneven surfaces, surfaces that have scratch damage or surface seals, or printed surfaces are not available.Mounting surfaces with dirt, salinity, or moisture are not acceptable.