DAIWA Silver Creek Air TW Stream Custom 8.5L

Equipped with a Φ28mm G1 duralumin Stream Trout Brake Tune spool (fixed inductor rotor), it exerts stable braking force.
Improves accuracy for pinpoint fishing in mountain streams!
When fishing in mountain streams and headwaters, there is a high frequency of casting with irregular forms and inconsistent input when fishing at points with a variety of variations. With a normal AIR brake system, the inductor rotor activates in the short time between the release of the lure and its landing on the water during a short cast. With an ultra-short cast or a cast with extremely small input, the inductor rotor may not activate. In this way, a discrepancy occurs between the angler's actual image and the operation of the inductor rotor, resulting in variations in cast accuracy.
To eliminate such stress, the Stream Trout Brake Tune fixes the inductor rotor and applies a constant, weak brake, achieving highly accurate point fishing and comfortable fishing with few problems.

HYPERDRIVE DESIGN
The next-generation design concept for bait (double-axis) reels, which significantly improves the standard of all basic performance with the aim of maintaining high initial performance for a long time. The Hyper Drive Design is composed of up to four technologies. Hyper Double Support, which requires the Hyper Drive Digigear to maintain smooth rotation for a long time and assists the gear drive to provide strong and light winding. Hyper Armed Housing, which strongly supports the internal structure and is less likely to bend or distort. Hyper Tough Clutch with an insulating structure that continues to operate even in harsh locations and drastically reduces adhesion due to salt. The synergistic effect of these technologies continues to provide stable performance in any field.

HYPERDRIVE DIGIGEAR
A newly designed gear system that pursues sustained strong and smooth rotation. This is DAIWA's unique technology that achieves an increased meshing rate without reducing the module (size) of the gear teeth, which directly affects durability, allowing the initial smoothness to be maintained for a long time.

HYPER DOUBLE SUPPORT
A drive support system that achieves sustained smoothness and strong, light winding. Both ends of the pinion gear are supported with two ball bearings with high precision, allowing for strong, light winding even under load without attenuating the input from the handle.

HYPER ARMED HOUSING (FULL AL)
A housing system that firmly supports the internal structure with high rigidity and precision, producing a precise winding feel and power. The use of metal materials for the frame, which is the essential condition, makes it possible to continue to exert basic performance for an even longer period of time by combining it with side plates and set plates.

HYPER TOUGH CLUTCH
Not only does this clutch system have crisp on/off performance that continues to slide thousands or tens of thousands of times, but it also has extremely few problems even in highly saline seawater. This cutting-edge insulation structure has already reduced the number of repairs due to sticking in harsh saltwater environments by 99% compared to our previous model.

TWS (T-WING SYSTEM)
TWS has succeeded in significantly reducing the resistance of the line guide close to the spool, where the spool rotation speed is the highest. By reducing the resistance to the casting distance, not only is the casting distance and controllability improved, but the fall is also faster and backlash is reduced. This has realized the possibility of a new level wind not only when winding, but also when casting.

UTD (Ultimate Tournament Drag)
This is a Daiwa drag system that eliminates the initial bite when the drag first starts working, achieving a smooth drag without stickiness (unevenness), while also providing maximum drag power the more you tighten it.

Zero Adjuster
First, adjust the "zero adjuster" and set the "zero spool rattle". Thanks to the evolution of the magnetic brake, it is now possible to control all lures with just the mag dial.
The "zero adjuster" is a mechanism that allows you to enjoy fishing comfortably without malfunctions while fishing by adjusting it to the "zero setting" before starting fishing.
*The "zero spool rattle" setting is the setting that does not push the spool while leaving a slight rattle (about 0.2 mm).

80mm AL crank handle
Equipped with a special I-shaped cork clear knob that is popular among trout anglers.

G1 duralumin spool
G1 duralumin is a special aluminum alloy that is twice as strong as magnesium and 1.3 times as strong as extra-super duralumin. This ultra-lightweight material with excellent rigidity is the highest grade of lightweight alloy, also used in aircraft structural materials and precision instruments. To maintain the same strength, it is possible to maintain sufficient strength by simply thinning the spool's winding surface without blanking, in order to achieve an overwhelmingly lightweight feel. The high rotation response brought about by the lightness and the unparalleled precision of rotation due to the high rigidity are unmatched.

Drag pull click
Drag pull click is a structure that makes a clicking sound when the line is pulled out during a fight with a fish, so that you can tell that the drag is working by the sound.

Stream Trout Brake Tune (fixed inductor rotor)
PE tune specification with brake setting for PE line with recommended winding amount. Brake setting that can be used with not only PE but also nylon line and fluorocarbon line. Setting that prioritizes accuracy for short to medium distance casting in mountain streams, advocated by the late Hiroyuki Motoyama, a leading expert in mountain stream bait finesse.