DAIWA Presso Limited AGS 58L

Absolute area brought about by sharpened sensitivity and light weight

■ Hollow high-sensitivity carbon grip

• The inside of the grip has a hollow structure, making it super lightweight.
• The hollow structure resonates the vibration of the blank, resulting in maximum hand sensitivity.
• Like the blank, it is made by winding carbon

■ SVF Nano Plus suitable for flagship is adopted for the blank

• A slender and lightweight blank that has both power and sensitivit

■ Next-generation "AGS" with lightness and sensitivity

• Equipped with R frame guide
• Achieve high-level flight distance, high sensitivity, and trouble-free by selecting the optimum diameter and optimum position.

Thoroughly brush up lightweight and high sensitivity!

The design is reminiscent of the original PRESSO SVF, but the contents are state-of-the-art tournament specs.
The hollow high-sensitivity carbon grip that brings all the information at hand transforms the underwater world that was only imagined into a real one.
Introducing a high-end model that will build a new era, inviting what you have to the next stage.

■ 58L: Bottom capture specialty

A bottom capture rod that captures every bite and brings it to landing by operating bottom vibes such as step dart and dither, and lures such as iron plate vibes at will. The length of 5ft8inch enables delicate action, and the action adopting slow taper promises a reliable landing by following the movement of the fish even in a fight with a single skin. Demonstrates the best performance in combination with low elongation lines such as ester and PE lines.

Hollow lightweight high-sensitivity grip
The carbon grip that is reminiscent of the original PRESSO SVF has evolved.
Absolutely high sensitivity and lightweight. The appearance has a PRESSO-like appearance that other companies do not have.
The thickness is such that you can hold it without grasping it.
The foregrip also has a carbon outer circumference to further improve sensitivity and operability.

The AGS (R frame / C / N ring)
guide uses a lightweight, highly rigid, trouble-free R frame, and "AGS" equipped with a thin, lightweight C ring and N ring.
By removing all the guide settings, the usability of the ester line has been greatly improved as well as the flight distance.

Air sensor seat
Lightweight and highly sensitive air sensor sheet "Neo Traditional" is used. The combination with carbon grip brings super sensitivity.

■ AGS [Air Guide System]

Lightweight and highly sensitive air guide system "AGS". The lightweight carbon frame improves flight distance and control performance. Carbon, which is about three times as rigid as titanium, has high sensitivity that directly transmits to the blank without absorbing the slight signal transmitted through the line. Both single foot and double foot have more variations in size and shape. In addition, the next-generation "AGS" equipped with the newly developed lightweight ring "C ring (cobalt alloy)" and "N ring (siliconite)" is now available. Keep an eye on the evolution of "AGS".

■ SVF NANOPLUS

By reducing the amount of resin, more carbon fiber is infiltrated, and Toray Industries, Inc. Nano Alloy® technology is combined with the carbon sheet "SVF" that realizes lightness, power, and slimming by Daiwa's original manufacturing method, making it even higher. It has made it possible to make it stronger and lighter.

■ ESS [Expert Sense Simulation]

Sensitivity area design system "ESS" When a rod bends, energy (restoring force) that tries to rise in the opposite direction is generated. This is the "strain energy" that the deformed (distorted) blank tries to recover, and is a very important factor that influences the performance of the rod. DAIWA has developed a system to analyze and design this "strain energy". Not only can you clearly grasp "what is excellent" and "what is lacking" numerically, but it is also possible to reflect the area called the expert's sensibility on the rod. Innovative rod design system "ESS" that creates a rod that exceeds the ideal.

■ V-JOINT 

Smooth knot bending realizes ideal tone and power-up. DAIWA's original bias structure is used for the joints. Achieves smooth bending of the mating part and improves power response and sensitivity.

■ X45

"45 °" is the best way to prevent twisting. Optimal structure to prevent twisting that revolutionizes power and operability. By wrapping DAIWA's original bias cloth (carbon fiber skewed to ± 45 °, etc.) around the conventional structure (0 °, 90 ° to the rod tip), twisting is prevented and power, operability, and sensitivity are dramatically improved. Improved. * The "45 °" X structure, which is the strongest against twisting, is used for naming. "X Torque" has been renamed to "X45" as a universal trademark.