DAIWA Outrage J62B-3

J62B-3 :

A model suitable for capturing areas with a depth of around 40 to 100 m with a jig of PE2.5 to 3 and 160 g ± 20 g. Thorough pursuit of ease of one-pitch jerk using semi-long to long jigs. The best one for 10kg class blue-backed fish such as yellowtail, amberjack, which are the main targets for inshore jigging centered on PE3.

Jigging model

• Blank design that successfully combines sharp jerk and fight load
• Authentic all-piece model with a focus on strength and bending
• Lightweight air sensor seat (SP model) that enhances grip and operability
• 25g reduction compared to the previous work CATALINA (63MLS) and the same standard item (J63-S)
• The grip end has a straight shape so that you can jerk with armpits without stress under heavy load.

A high standard jigging model that inherits the design concept of the high-end model SALTIGA. Each model is designed to have the best balance that allows you to move the compatible jig firmly while suppressing tension and reducing the physical load during fighting while retaining the lift force. By adopting a lightweight air sensor sheet, it is possible to significantly reduce the weight, and you will not get tired even if you jerk for a long time. In addition, a model that boasts potential comparable to that of higher-end models, such as a one-piece design that emphasizes strength and tone, has been completed.

The spinning grip uses the lightweight air sensor sheet that is also used in "SALTIGA R".

The bait grip is a TCS seat that emphasizes holdability

TECHNOLOGY :

■ X45

"45 °" is the best for preventing twisting. Optimal structure to prevent twisting that revolutionizes power and operability. By wrapping DAIWA's original bias cloth (carbon fiber skewed to ± 45 °, etc.) around the conventional structure (0 °, 90 ° to the rod tip), twisting is prevented and power, operability, and sensitivity are dramatically improved. Improved. * The "45 °" X structure, which is the strongest against twisting, is used for naming. "X Torque" has been renamed to "X45" as a universal trademark.

■ V-JOINT

Inlay of V- joint made by winding highly elastic graphite alternately at an angle of 45 °. Exile to the utmost the strain, tension, and power loss of the mating part that could not be achieved with the conventional joint rod. Succeeded in demonstrating the performance closest to one piece. Of course, the bent curve of the entire rod will be as smooth as possible, and it will directly convey the behavior of the sea bass and the action of the lure.

■ HVF NANOPLUS

High- density HVF carbon, which reduces the amount of resin and increases the density of carbon fiber instead, is the best material for rods that emphasize stickiness and strength, and Toray Industries, Inc. Nano Alloy By combining (R) technology with Daiwa's original manufacturing method, it has become possible to further increase the strength and weight.