DAIWA Metallia Kattou HH-142

  The series "Metallia" that incorporates the gene of the rod "Extreme" that revolutionized the world of boat rods with the ultra-high sensitivity brought about by "Super Metal Top".

The tip is equipped with a "metal top" that uses the same superelastic titanium alloy material as the "extremely sharp". However, while the "super metal top" is the tip of the titanium alloy material with a cloth wrapped around it, the "metal top" is different in that the sensitive material is mounted as it is as a solid tip. It is a series that realizes the super-sensitivity of ultra-sharp swaying, and realizes the excellent sensitivity and the transmission of atari that can be felt even in the hands of the super-elastic titanium alloy material, so that you can feel the merits of the metal tip more closely. ..

The synergistic effect of the metal top, AGS, and air sensor sheet allows you to catch the delicate Atari without missing a catch.

The metal top, which also expresses the extremely delicate Atari of blowfish, is the greatest weapon in KattouFugu fishing, where the ability to catch Atari is directly linked to the fishing results. In addition, if you can feel the sign of blowfish due to the good hand sensitivity, the advantage of the fisherman will be further enhanced, and the sensitivity and operability will be improved by adopting Daiwa's original carbon frame guide "AGS" which is lightweight and has excellent rigidity. Is better than ever. Regarding operability, the "X45" structure prevents the material from twisting, so hooking is accurately determined, and if you can feel the blowfish even in time fishing where you hear at regular intervals, you can improve efficiency without scattering blowfish. .. Not only high sensitivity, but also sharp operability and lightness make it a very attractive rod for cut toe.

■ SUS guide (all SiC ring)

Lightweight guide design that considers the balance of the entire rod, including the AGS guide at the tip.

■ AIR SENSOR SEAT (air sensor sheet)

A new reel seat that uses carbon reinforced material created in pursuit of the optimum balance of rigidity, strength, sensitivity, and lightness that is optimal for reel seats. Since carbon fiber is stronger than conventional resin, we succeeded in reducing the weight by cutting the meat accordingly. Furthermore, since the high rigidity is directly linked to the good sensitivity, it is a high-sensitivity specification in which vibrations such as atari sensed by "AGS" are transmitted to the hand as it is.

■ Grip end

Pursuing a length that allows comfortable rod work.

Color clear & polarized violet pincushion step coating finish.

accessories

• Zippered rod bag
• Chloroprene rod belt

Precautions when using electric reels

We recommend using up to 300 sizes of Daiwa electric reels. Of the 300 size electric reels, Super Tanacon X300W, Magmax 300 and Seaborg 300 cannot be installed (Seaborg 300MJ, Seaborg 300J, Seaborg 300FB, Seaborg 300 Mega Twin can be installed). In addition, 400 size and above cannot be installed because the thickness of the foot is provided depending on the product.

Precautions when using metal top

■ About the temperature change of the metal top.
Due to the characteristics of the material of superelastic titanium alloy, the elasticity of the superelastic titanium alloy decreases in a low temperature environment of 5 ° C or less, and the return of the tip of the tip becomes slow. Due to the extreme cold in the early morning and at night and the influence of the wind, a noticeable bend may occur. Furthermore, in an environment of 0 ° C or lower, the decrease in elasticity progresses further, causing a phenomenon in which the tips of the tips remain bent and do not return. In either case, if the temperature rises, it will return to its original superelasticity and can be used normally.

■ Please avoid using it that causes excessive bending.
The metal top can be used comfortably in normal operation, but excessive bending due to external factors such as entanglement and thread entanglement at the tip may leave habit (plastic deformation) or damage due to metal fatigue. there is.

■ You can correct any habits by hand.
If a habit remains as in 2, you can correct it by slowly bending it in the direction opposite to the curved side. However, repeated correction of habits may cause metal fatigue, so avoid operations that leave habits such as entanglement.

Please be sure to read the instruction manual for comfortable use