DAIWA Light Holder Metal α 90CH Gunmetal Blue

Even stronger! Be stylish! The definitive version of a boat rod!

Up to compatible Harris No. 10.
The vertical and horizontal replacement can be done easily by simply loosening the swing base bag screw, and it is a switching method that does not choose the ship's bag.
The arm can be adjusted by operating the angle adjustment screw from horizontal to 16 degrees upward.
It can swing 50 degrees in 3 steps to the left and right.
Compact and lightweight (about 30g) clamp head CH30G is standard equipment, and attached sizes (M, S, SS, SSS).
One-touch adjustment is possible with a one-touch bottle stopper.

■ Uses one-touch bolt stopper :

Hold the holder so that the bolt is vertical as shown in the figure, and release the bolt stopper to move the bolt up and down, allowing quick installation and removal.

■ Do not choose the boat. Both vertical and horizontal attachment are possible :

Swinging base bag Just loosen the screw to quickly and smoothly handle both vertical and horizontal attachment.

The angle of the rod can be adjusted by raising the arm and rotating the angle adjustment screw as shown in the figure. When the screw is screwed in to the end, it becomes horizontal, and if it is loosened, the angle becomes higher. The range of adjustment is from horizontal to about plus 16 degrees.

Loosen the swing head bag screw, determine the swing angle, fit the convex part of the swing base into the concave part of the upper vise, and tighten the screw again.
* Please be careful not to get in the way of the angler next door.