DAIWA Gekkabijin Shizuru 50S #Ami Chirashi

A new sensation minnow that can be changed!

■ The combination depends on the angler!
By removing the standard worm and attaching a Gekkabijin worm to the pin on the body, you can arrange various silhouettes.

■ How to use : 
In the case of mebaring, it is basic to retrieve at slow to medium speed. It is recommended that you adjust the retrieve speed based on one rotation of the reel handle every 1 to 2 seconds, depending on the situation.

■ Gekkabijin worm can be attached : 

By removing the standard worm and attaching a Gekkabijin worm to the pin on the body, various silhouettes can be arranged. You can enjoy it with each angler's ingenuity by changing the action and wave motion.

■Gekkabijin bibiBeam 1.5 Installation example : 

When installing worms of 2 inch class or higher such as Sword Beam or Beam Stick 2.2 inch, we recommend cutting them to your preferred length before installing.

How to wear : 

Insert the body pin straight into the worm insertion hole

If there is a gap between the body and the worm, pinch the position a little away from the connection part and push the worm strongly and straight.

* Precautions when attaching the worm
・The tip of the pin is sharp. Please be careful when installing.
・Please set it straight so that the pin passes through the center of the worm.
・When installing a worm other than the standard equipment, cut it to your desired length and install it.
・Please insert it firmly to the root so that the worm does not fall out.
・Please note that if you attach a worm that is not made of elastomer material, it may fall off.

* Precautions when storing worms
Standard worms and Gekkabijin series worms use a special material (elastomer).
If stored with worms of other materials, they will deteriorate, so please store them separately.