DAIWA FL Joint Red

Easy operation with one hand by attaching to the landing net. "FL joint" with automatic lock function

■Attached to the net, foldable when not in use, compact storage 

■ 2 packings to prevent screw loosening

■ 1 O-ring to prevent net fluttering 

■ Can be attached to commercially available landing nets and ball patterns (screw standard: W1 / 2. Mountain 12)

Image of use
(* The photo is the color attached to " Landing Net FL ")

Fold it with one hand, open the net just by shaking the handle, and lock it automatically

After use, be sure to remove the frame and handle, wash with fresh water, and lubricate the lubricated area with rust preventive lubricant.

(1) Turn A (frame fixing nut) in the direction of the arrow and lower it.

(2) Attach the FL joint clockwise around the frame and close it to the end.

(3) Loosen the FL joint slightly counterclockwise from the position (2).

(4) In that state, tighten A clockwise to the frame side and temporarily fix it.

(5) While holding A, tighten the entire frame counterclockwise.

(6) Repeat steps (3), (4), and (5) until the FL joint is perpendicular to the frame.

Attach the split ring to the center of the bottom of the net.
The O-ring is attached as shown in the illustration on the left, and it is compactly organized by suppressing the fluttering and wind resistance of the net when moving or carrying