DAIWA CP Keeper Multi Black

A keeper stand where you can set a spare rod or ball handle. Compatible with rods up to about Φ45 mm in diameter. With special screws + double-sided tape for easy installation.

Example of use

You can freely choose between bottomed and bottomless

■ How to install

1. Clean the surface to be adhered with dirt, moisture, etc.
2. Peel off the double-sided tape sheet attached to the base and lightly attach it to the surface you want to bond.
3. 3. After checking the mounting position, bending, etc., press the base strongly to completely bond it.
Four. After temporarily fixing with double-sided tape, fix it firmly with the attached screws.

* Double-sided tape is for temporary fixing and cannot be completely fixed. Please be sure to screw it.
* Do not overtighten the screws until they are idle. Please note that the screws will not work.
* The balance may be lost due to the terrain, wind, and the weight of the tackle, and the tackle may fall over. Please be careful.

Size (mm) : Length: Approx. 170 x Thickness: Approx. 55 x Width: Approx. 90 (top), Approx. 75 (bottom)