DAIICHISEIKO 33046 Recycler

Reusing an empty spool. Environmentally friendly.
The reel line can be rewound quickly by reusing the empty spool and can be kept (smooth rotation with two built-in bearings).
Possible to rewind the line on the reel with ease. (Possible to make tension adjustments freely as desired)
Fixed with a strong suction cup that can be attached to tables, windowpanes, and car bonnets and is ideal for winding the line on the reel on the fishing spot.

● Size (including cover): 190 × 90 × 100 mm
● Weight: 195 g
● Maximum installation width: 70 mm
● Shaft diameter: 5.6 mm

MADE IN JAPAN

● Adsorption method
1) Cleanly wipe off the dirt and moisture on the adsorption surface to be used, such as that of a table or car.
2) Attach only the suction cup.
3) Put a washer on the bolt of the suction cup and put the cover.
4) Select horizontal or vertical mounting. * The internal nut rotates.
5) Tighten the bolt of the sucker and the internal nut while turning the main part.
* The inside of the suction cup pulled with the bolt becomes a vacuum state and powerfully adsorptive.

● Adsorption method from the state where the main body, cover, and suction cup are set
Loosen the bolt and body of the suction cup as much as possible, press the main body strongly against the suction surface, then turn and let it strongly stick.