DAIICHISEIKO Multi Stand 160

It’s perfect for squid seeker metal and vertically controlled horse mackerel lures.
A long new clamp version of the Multi Stand (i.e., a multi-purpose rod stand that can change its style) is now available with the effective clamp mounting width increased to 160 mm.

You can change the style by turning the pipe around (rod keeper and rod stand styles).

It is also equipped with a line hook, which prevents the lure from going haywire while moving.
You can shake the lure up and down with the rod in place.

SPEC : 

Compatible rod diameter: Up to 36 mm
Clamp mounting width (vertical and horizontal mounting):
85 to 160 mm [with a sprint: 0 to 160 mm].
Rod angle: Eight levels of up/down and free swivel angle
Material: Glass-fiber reinforced plastic
Equipped with a line hook
Equipped with a quick bolt function
Handle ring included
Spring included (105 mm × 80 mm × 58 mm)
Weight: 842 g
Storage size: 312 mm × 157 mm × 74 mm

Rod keeper style : 

The rod can be held at an angle instead of vertically, which prevents the tangling of lures that have leaders, such as squid seeker metal and vertically controlled horse mackerel lures.

Rod stand style : 

It is useful when you change fishing points.
A locking function is available for a standing rod.

Long Clamp : 

The effective mounting width of the Multi Stand has been increased to 160 mm.
This wide version can be used on any boat’s side.

You can use the provided splint at a height close to your waist if you set the splint on the upper boat side.
*Insert and set the clamp into the cutouts in the splint.

the boat side, and basic functions allowing vertical and horizontal installation and pivoting. A handle ring is also provided.

Equipped with a line hook : 

The product has a line hook that can temporarily secure a line with a lure attached, preventing unexpected rod tip breakage.

It is also convenient to keep the line in place when changing lures. Therefore, the line is not agitated by the wind.

Shakable : 

You can shake the lure up and down with the rod in place.

Angle adjustable : 

Rod angle: Eight levels of up/down and free swivel angle

Clamp Compatibility : 

You can use this product as a base type by purchasing the #26 Base Set of parts (09076) for our Lark 900 product.

By purchasing the #14 Clamp Set of parts (09330) for the Super Uketaro 240 and the #Set Screws 6×22 (59320) and #Washers (59147) for the Multi Stand 130, the mounting width can be extended from 50 mm to 240 mm.

* The set screws provided with the Multi Stand 160 cannot be attached to the clamps for the Uketaro or the Multi Stand 130. (The Multi Stand 160 and the Lark use M8 screws, and the Uketaro and the Multi Stand 130 use M6 screws.)
* If you attach the Lark 900 base to the boat side for the Multi Stand 160, make sure that the desired rod stand style is possible before positioning the base.

Note : 

●The Multi-purpose Stand 130 is not a product that can completely secure the rod.
Be careful not to drop the rod unexpectedly. The warranty does not cover the rod or reel falling off.
●The load capacity of the rod holder depends on the mounting conditions of the clamp.
Do not attempt to mount the clamp on smooth surfaces.
●The clamp screw may loosen due to vibration. Occasionally check to make sure it is tightened.
●Do not support your body by holding the rod on the stand.
●Release the lock when changing from the rod stand style to rod keeper style. Applying force will cause damage.
●It may not be possible to mount the product depending on the shape of the boat’s edge.
●Be sure to wash the product with fresh water after use, drain off the water well, and store the product after lubricating.