DAIICHISEIKO Gichigichi Winder SP

A winder that applies load only to the line without burdening the reel or the user, using the power of an electric screwdriver.

- Maximum clamp mounting width: 43 mm
- Number of ball bearings: 4
- Compatible spool sizes: #4000 class to #30000 class (Outer diameter: up to ⌀100 mm, spool skirt inner diameter: ⌀45 mm to ⌀90 mm)

Compatible electric screwdrivers: 6.35 mm hexagonal shaft (sleeve type) and three-jaw drill (chuck type). Requires stable output of at least 20 N·m torque (for a line tension of 10 kg).
*Due to high power consumption depending on usage conditions, we recommend using either a corded or a high-capacity (e.g., 6.0 Ah at 18 V) battery-powered electric screwdriver.

Feature 1
By removing and setting the spool from the large spinning reel, you can easily wind the line even under high load using the power of an electric screwdriver!

Feature 2
Smooth winding with guide rollers that move the shaft effortlessly. Guide rollers are equipped with ball bearings and linear bushings. The body contains three ball bearings.

Feature 3
A high-rigidity body made of reinforced plastic combined with a stainless-steel shaft.

Feature 4
Rubber material is used at the contact points with the spinning reel spool to prevent scratches and slippage.

Feature 5
Easily clamp it to a table or other surfaces using a clamp that is adjustable in four directions!

Feature 6
The clamp can be removed for mounting on wood using screws (compatible with ⌀6 mm screws).