ABU GARCIA Salty Stage Concept-Free

Aluminum frame, spool diameter φ33mm, 2-position single handle, 95mm double handle, shallow spool included. The ultimate freestyle model for shallow to deep areas such as hairtail, light jigging, tai rubber, and baitcasting.

Durametal Frame
The aluminum frame is designed to be lightweight without compromising strength. The material is designed for tough use in saltwater.

High-durability Dura Gear Brass Gear & High-strength Brass Gear Shaft
To handle big fish, high-strength brass gears are used for the drive system and high-strength brass gear shafts for the support shafts. Designed for forceful power winding.

F-mode brake system
Springs are used for the six centrifugal brakes. When falling, the brakes are not applied, allowing for quick falling, and a spring mechanism can be installed that applies the brakes in an emergency, such as when underhand pitching a jig or a red snapper.

Backup ratchet
In addition to the one-way bearing at the base of the handle, a ratchet-type backup ratchet is also used to prepare for the unlikely event of a large catch.

Dura Clutch
The operating parts have been thoroughly redesigned to make the clutch easier to disengage and more durable.

Carbon Matrix Drag & Drag Clicker
Abu Garcia's unique carbon matrix drag washer allows for higher drag force while maintaining smooth performance over a wide range.
By using the clicker, you can grasp the speed extracted from the drag and be aware of line breaks while handling the lure.

φ33mm deep spool made of super duralumin
Considering various line uses, a guide line for winding 1/4, 1/3, or 1/2 of the line wound amount is machined on the side of the spool. It makes it easy to consider the guide line for winding amount, which is a hassle. It is possible to fit the appropriate line capacity exactly, making it possible to make the most of the benefits of the maximum spool diameter. PE 1.5-200m, which is ideal for hairtail, is a perfect fit. In addition, PE 1-300m line capacity can be used for deep tairaba.

Spare φ33mm shallow spool made of ultra-super duralumin
The spare spool has a line capacity of PE No. 1-200m. It can be used for shallow area fishing with tairaba in spring, squid metal in summer, and baitcasting in all seasons.

Recessed reel foot
The split reel foot pushes the spool downward, making it possible to achieve a lower profile. The height from the foot is approximately 40mm. It provides comfortable palming performance.

Big round EVA knob & 60-70mm 2-position handle arm
Power handle. Allows you to comfortably reel in heavy jigs. The 2-position single handle arm allows you to set the length to your preferred length of 60mm or 70mm (casting is not possible in this state).

Middle round EVA knob & 95mm long 4mm thick crank handle arm
The optional 95mm long 4mm thick aluminum crank handle is equipped with a round type EVA knob. By replacing it with the included tool, it can be used for tai rubber, sutte, and casting games.

Super Free HPCR-BB
Reducing the size of ball bearings is a way to reduce resistance, but it makes them weaker when it comes to load bearing. Abu Garcia has redesigned the ball track groove of the bearing and succeeded in developing a ball bearing with low rotational resistance of the conventional size. Low trajectory pitching and long distance casting performance have been improved.

Salt Shield TM Pinion Bearing
By adopting a newly developed ball bearing with a water-repellent coating applied to the entire inside and outside, the salt jamming phenomenon that causes abnormal rotation noise has been greatly reduced.
We have succeeded in significantly improving the rotation feel and durability. It is adopted in the pinion gear part, which is the part of a spinning reel where salt crystals are most likely to remain.

Mechanical brake with line memory
This reel can be used to target a variety of targets, so it's easy to forget the thickness of the line. By setting the line memory, you won't forget your strategy for the day, and you can be confident about your next fishing trip.