ABU GARCIA Oceanfield BG

High performance big low profile reel with drag MAX 10kg, long power handle, and optional double handle.

Magtrax Brake System
In windy conditions, the lure tends to be pushed back by the wind as soon as you start casting, causing backlash. Therefore, the Magtrax brake system uses a magnet to ensure that the brakes are applied the moment the lure is released. Note: Casting is not possible when the single handle is attached. Please be careful.

Power Stack Carbon Matrix Drag
Normally, when there are two drag washers, only two surfaces on one side are effective, but by making the outer diameter of the drag washer uneven, it is effective on three surfaces, one more than usual. It not only provides maximum drag force, but also excellent sliding performance.

Low profile body
The height from the foot is approximately 50mm. It provides comfortable palming performance.

Backup ratchet
In addition to the one-way bearing at the base of the handle, a ratchet-type backup ratchet is also used to prepare for the unlikely event of a large catch.

3-position power handle
4mm thick 3-position single handle arm that can be used in lengths of 60mm, 72mm, or 85mm depending on the weight of the jig.

Middle round EVA knob & 105mm long 4mm thick crank handle arm
The included 105mm long 4mm thick aluminum crank handle is equipped with a round type EVA knob. By replacing it with the included tool, it can be used for casting games.

1/3, 1/4 split guide lines for winding
Considering various line uses, we machined guide lines for winding 1/3, 2/3, 1/4, 1/2, 3/4 of the line volume on the side of the spool. This simplifies the process of determining the guide for winding volume. This allows you to get the line capacity just right, making it possible to maximize the benefits of the maximum spool diameter. Please refer to the separate table.