LIVRE 10784 Custom Balancer Short Type 2 C2 for Shimano #Titanium x Gold

The Custom Balancer Short Type 2 is a Japanese design with a novel design reminiscent of a windmill.
This is a shorter model of the Custom Balancer Type 2.

This product cannot be used as a support to protect the reel from scratches on the ground. The aluminum cap is made of aluminum (super duralumin) and is anodized, making it a very delicate material. If it is scraped, the anodization will come off, the adhesive groove will be crushed, making it impossible to remove the aluminum cap, and there is a risk of corrosion, so never let it touch the ground.

Custom Balancer Type 2
This product cannot be used as a support to protect the reel from scratches on the ground. The aluminum cap is made of aluminum (super duralumin) and is anodized, making it a very delicate material. If it is scraped, the anodization will come off, the adhesive groove will be crushed, making it impossible to remove the aluminum cap, and there is a risk of corrosion, so never let it touch the ground.

Sharp, three-dimensional design with laser marks
Type 2 is inspired by a windmill with eight interwoven blades. The laser marks give it a sharp, three-dimensional design.
* The cap, line stopper, skirt, weight, and spring are the same as the Custom Balancer.

Ideal balance setting
A custom balancer that suppresses pre-casting and twitching and supports stable reeling. By adjusting the weight optimally, you can achieve the ideal balance.

Easy and speedy adjustment
Adopts the Perfect Balance System, which allows fine weight adjustment by combining five weights and two types of springs. Balance settings are possible in 2g increments/10 taps in total.

Attention to detail
Two O-rings can be used as line stoppers. O-rings are used on the aluminum cap and reel attachment side to block water intrusion. Not only does it look good, but attention to detail is also packed into it.
Compatible line: 2lb~20lb