DAIWA 24 IM Z TW 200XH-C

The next-generation baitcasting reel series IM Z features expandability through updates to the reel body through the DAIWA connecting system. The new 200 series has been released.
The aim of the spool development for the 200 series was to incorporate all the characteristics of the DAIWA MAGFORCE brake system. The spool characteristics were verified with the image of not only the LC concept but also the SV concept, and even the ultra-long-distance casting style when using PE line. Specifically, in addition to adjusting the weight balance of the spool unit when the line is wound, a new shape for the inductor rotor was developed.
As a result of the significant differentiation from the direction of ultra-long-distance casting performance aimed for with the LIMITBREAKER-equipped spool, it has a wide range of lure compatibility from around 10g to 110g (4oz), and has easy-to-use and stable casting performance despite the large diameter φ38mm spool.
The first gear ratio of 7.3 (87cm per handle rotation) in the IM Z series is available. The new high-grip I-shape power large knob (S) is adopted for the first time on the 90mm aluminum handle for reeling fishing. Its high basic performance is fully equipped with "HYPERDRIVE DESIGN", "TWS", "DAIWA CONNECTING-SYSTEM" and "INTELLIGENT MAGFORCE".
It is possible to challenge monster fish without flinching, regardless of freshwater or saltwater or fish species.
The 200-C series also supports the DAIWA CONNECTING-SYSTEM.
In addition to the four basic brake modes, if you earn the badges of "5 fishing trips achieved" and "total casting distance achieved 10.0 km" (if you meet the installation conditions), you will be able to use "PE Long Cast", which started distribution on October 30, 2023.
In addition, the 200-C is highly suitable for bass fishing, and in this type of fishing that requires a lot of casting, there are high expectations for the collection and accumulation of more useful data for anglers to analyze themselves.
*Salt compatible

HYPERDRIVE DESIGN
The next-generation design concept for bait (double-axis) reels, which significantly improves the standard of all basic performance with the aim of maintaining high initial performance for a long time. The Hyper Drive Design is composed of up to four technologies. Hyper Double Support, which requires the Hyper Drive Digigear to maintain smooth rotation for a long time and assists the gear drive to provide strong and light winding. Hyper Armed Housing, which strongly supports the internal structure and is resistant to bending and distortion. Hyper Tough Clutch with an insulating structure that continues to operate even in harsh locations and drastically reduces adhesion due to salt. The synergistic effect of these technologies continues to provide stable performance in any field.

HYPERDRIVE DIGIGEAR
A newly designed gear system that pursues sustained strong and smooth rotation. This is DAIWA's unique technology that achieves an increased meshing rate without reducing the module (size) of the gear teeth, which directly affects durability, allowing the initial smoothness to be maintained for a long time.

HYPER DOUBLE SUPPORT
A drive support system that achieves sustained smoothness and strong, light winding. Both ends of the pinion gear are supported with two ball bearings with high precision, allowing for strong, light winding even under load without attenuating the input from the handle.

HYPER ARMED HOUSING (FULL AL)
A housing system that firmly supports the internal structure with high rigidity and precision, producing a precise winding feel and power. The frame, which is the key component, is made of metal, and when combined with the side plate and set plate, it makes it possible to maintain basic performance for an even longer period of time.
In this series, the frame, gear side plate (handle side), and dial side set plate are all die-cast with aluminum alloy and finished with high-precision machine cutting to provide unwavering rigidity.

HYPER TOUGH CLUTCH
Not only does this clutch system have crisp on/off performance that continues to slide thousands or tens of thousands of times, but it also has extremely few problems even in highly saline seawater. This cutting-edge insulation structure has already reduced the number of repairs due to sticking in harsh saltwater environments by 99% compared to our previous model.

TWS (T-WING SYSTEM)
TWS has succeeded in significantly reducing the resistance of the line guide close to the spool, where the spool rotation speed is the highest. By reducing the resistance to the casting distance, not only is the casting distance and controllability improved, but the fall is also faster and backlash is reduced. This has realized the possibility of a new level wind not only when winding, but also when casting.

ATD
The ATD operates smoothly and continues to work smoothly in response to the pull of the fish. It pursues smooth start and tracking, allowing you to concentrate on the fight without worrying about the drag setting.

Zero Adjuster
First, adjust the "zero adjuster" and set the "zero spool rattle". Thanks to the evolution of the magnetic brake, it is now possible to control all lures with just the mag dial.
The "zero adjuster" is a mechanism that allows you to enjoy fishing comfortably without malfunctions while fishing by adjusting it to the "zero setting" before starting fishing.
*The "zero spool rattle" setting is the setting that does not push the spool while leaving a slight rattle (about 0.2 mm).

ZERO SHAFT
The spool is only supported by the bottom bracket. The shaftless design eliminates excess resistance and provides ideal spool rotation.
In other words, it is the key to a high-output engine that prioritizes casting performance.

IM Concept
A digitally controlled brake that allows you to select the brake "force" and "characteristics."
A brake that detects the spool rotation and is digitally controlled. In addition to adjusting the brake "force," you can also select brake "characteristics" such as PE mode or long-distance casting mode. You can set the optimal brake according to the situation, the lure used, and the angler's skill and physical strength.

A brake system that detects spool rotation and digitally controls the brake force for each mode.
By simply operating the control switch installed on the outside of the side plate, you can instantly switch to completely different brake characteristics.
Not only can you get a mode that excels in long-distance casting performance, but you can also get versatile performance that shows adaptability to headwinds and lures with high air resistance, and can handle a wide range of lures, so you can bring out a variety of casting performance with just one unit without changing the spool. This is the charm and greatest advantage of the IM concept.
Not only that, but you can add and set new brake modes by updating the reel body through the DAIWA app. This is the moment when the reel performance itself grows.
In addition, there is a 200 spool and a LIMITBREAKER spool that support spool replacement. As with the spool customization supported by conventional models, you can achieve different casting feels according to the spool characteristics, further expanding the range of fun of casting.

Only one brake mode is available at the time of purchase (factory shipment)

Standard model
LED: Light blue

By registering the product in the DAIWA app, three additional brake modes are available

PE/Blade mode
LED: Yellow

Long cast mode
LED: Purple

MAX Brake Mode
LED: Light Green

After updating the reel body, a new brake mode will be granted if certain conditions are met

PE long cast mode
LED: Orange

PE Long Cast Mode Setting Conditions
To use PE Long Cast Mode, you need the two badges mentioned above.
After obtaining the badges, you can set them up on the reel in the brake mode setting.
*You can check whether you have obtained any badges in the list of badges obtained on the MyData screen in the DAIWA app.
*A software update for the reel body is required to set a new brake mode.

Supervisor: Sera Yuki Pro Staff
The aim was to "go as far as you can!"
Bait casting with PE line is difficult for everyone, isn't it? Just when you start to get used to it, the line suddenly floats up, causing a backlash and making it impossible to recover... After that, you become scared and can't cast at full power. This time, we have developed a brake mode that can solve the problems you are having.
Thumming is also effective, but you don't want to apply excessive brakes, and you have to operate it with a delicate spoonful, so it is not stable and the results are inconsistent. Considering the current harsh field conditions, casting mistakes = reduced catches. Therefore, it is very important to improve the accuracy of your cast. The strength of the PE long cast mode is that it properly processes the timing when the line does not float up from the spool with digital control, and then reduces the braking force "as much as possible". As a result, you can extend the casting distance to the limit while suppressing troubles. You can bend the rod firmly without fear! Let's enjoy bait casting more and more!

Big bait mode
LED: Blue x Yellow

Big Bait Mode Setting Conditions
To use Big Bait Mode, you need the two badges listed above.
After obtaining the badges, you can set them up on the reel in the brake mode setting.
*You can check whether you have obtained any badges in the list of badges you have obtained on the My Data screen in the DAIWA app.
*A software update for the reel itself is required to set a new brake mode.

Supervisor: Kazumasa Okumura, a professional staff member
Frightening potential. Stable flight posture of jointed bait!
I want you to try casting a jointed type big bait with a spinning tackle. You will be shocked by the "sensation" of it not flying at all as much as you would expect and landing right in front of you.
When developing the big bait mode, I felt that the line tension during casting was important again. In the prototype brake mode that I cast first, the line was prone to slack, and I honestly felt that "to be honest, that's how it is." So, when I requested that the line slack be reduced immediately after casting, the brake control was immediately adjusted on the PC, and the big bait with that unstable flight posture was sent out smoothly. This leads to the story at the beginning, and I was convinced that "excess line slack causes the line tension to be released, causing the flight posture to collapse, and as a result, it does not fly." After repeated adjustments, I was able to set the control to continue to pull the lure slightly during casting. This is exactly the advantage of bait tackle. Overcoming the issue of this flight posture also increased the flight distance as a by-product. Of course. In addition, it also prevents the line from getting tangled on the hook when it hits the water, and has a brake mode that is essential for making that decisive shot.

Product Details

200 size specifications
Equipped with a spool specifically for the 200 size, which is different from the "ultra-long casting performance" that the IM Z LIMITBREAKER TW HD-C series aimed for.
Line capacity is nylon/fluoro 18lb.-100m. It can handle a wide range of lure weights from around 10g to around 110g, and has relatively stable brake control, which is an attractive feature of this model.

HYPER ARMED HOUSING (FULL AL)
In this series, the frame, gear side plate (handle side), and dial side set plate are all die-cast from aluminum alloy and finished with high-precision machine cutting to provide unwavering rigidity.

DAIWA CONNECTING-SYSTEM
DAIWA app and reel are connected
By sending the log data accumulated in the reel to your smartphone, you can view the "fishing log data" in the DAIWA app. It also has expandability, such as bringing out the performance of the reel and downloading new brake modes.
*Please turn on Bluetooth on your smartphone.
*To ensure a stable connection, do not place the connected IM Z too far away from your smartphone.
*Multiple devices cannot be connected to one smartphone.

LED light (4 lights)
Equipped with LED light (4 lights) on the palm side side plate.
Different LED colors and number of lights, as well as notification sounds, display and notify the current function mode and status mode.
Display example
Charging mode indicator: 1-4 green lights (1 red light when battery is almost dead)
Brake mode: 1-4 light blue lights (default STANDARD mode)
Mag dial value: 1-4 light blue lights *8 levels including flashing
Indicator: 1 white light changes brake mode (hidden at time of shipment)
2 white lights shut down

Control switch
The control switch is located on the palming side plate.
Startup, shutdown, brake force setting, and brake mode change can be performed with a single operation of the control switch. The synergistic effect of the LED light and operation sound is pursued for ease of use.
*Operation requires some getting used to.
*Various mode settings can be set by short press or long press. Please refer to the instruction manual for details.
*When changing brake mode, there is no need to open or close the palming side plate.
This allows you to instantly switch brake modes according to the situation at hand.

Number of continuous casts
A single full charge will last for approximately 2 days of fishing.
*This is data calculated based on our testing standards. It is not a guaranteed value.
*Continuous use is possible for approximately 700 casts.
*If the battery runs out, the MAGFORCE brake will be activated.
Braking force will be fixed at the maximum value.
*If the battery runs out, you can still cast and reel in as usual.
*Logs cannot be stored when the battery is out of charge.

Battery charging
Charging is required as the device is equipped with a lithium battery.
There is a connection terminal at the rear of the side plate on the palm side. Open and close the battery cap on the connection terminal and insert the included charging cord straight into the connection terminal all the way to charge.
*The connection terminal is waterproof.
*When charging, make sure the device is not wet.
Never charge the device when it is wet.
*After charging, be sure to close the battery cap before using.

G1 duralumin spool
G1 duralumin is a special aluminum alloy that is twice as strong as magnesium and 1.3 times as strong as extra-super duralumin. This ultra-lightweight material with excellent rigidity is the highest grade of lightweight alloy, also used in aircraft structural materials and precision instruments. To maintain the same strength, it is possible to maintain sufficient strength by simply thinning the spool's winding surface without blanking, in order to achieve an overwhelmingly lightweight feel. The high rotation response brought about by the lightness and the unparalleled precision of rotation due to the high rigidity are unmatched.

Drag pull click
In pursuit of high drag performance to catch big fish, we aimed to be the best in its class not only in terms of maximum drag but also in terms of smooth operation that follows the pull of the fish.
It also comes equipped with a drag pull click. It provides a big advantage to anglers by sounding the line system's last-minute attack and defense against a sudden charge by a fish.

Perfect Double Stopper
In addition to the normal stopper, it is equipped with a mechanical stopper.
It is highly durable, and in the unlikely event that the infinite stopper fails, another mechanical stopper will activate to prevent reverse rotation. This is a safety feature.