DAIWA 20 HRF PE Special 8.1 L-TW

A dedicated machine that focuses on the outstanding performance of long-distance casting and powerful winding required for a bait casting reel. Magforce Z PE long distance tune and TWS work together to pursue outstanding long-distance casting performance. The Φ34mm super duralumin spool has a line capacity of PE No. 2-150m. The compact body, which is easy to palm, is ensured with an aluminum frame and aluminum side plate for complete rigidity. In rockfish games, where the first turn at the moment of hooking is crucial, the gear ratio of 8.1 pulls the fish away from the roots and takes the lead. The drag is ATD and also equipped with a drag pull-out click, improving the feel in actual battles.

TWS (T-WING SYSTEM)
TWS has succeeded in significantly reducing the resistance of the line guide close to the spool, where the spool rotation speed is the highest. By reducing the resistance to the casting distance, not only is the casting distance and controllability improved, but the fall is also faster and backlash is reduced. This has realized the possibility of a new level wind not only when winding, but also when casting.

ATD
The ATD operates smoothly and continues to work smoothly in response to the pull of the fish. It pursues smooth start and tracking, allowing you to concentrate on the fight without worrying about the drag setting.

Zero Adjuster
First, adjust the "zero adjuster" and set the "spool backlash zero". Thanks to the evolution of the magnetic brake, it is now possible to control all lures with just the mag dial.
The "zero adjuster" is a mechanism that allows you to enjoy fishing comfortably without malfunctions during fishing by adjusting it to the "zero setting" before starting fishing.

Magforce Z PE Long Distance Tune
This model uses PE Long Distance Tune.
The inductor rotor operates smoothly according to the spool rotation speed, making it possible to strengthen the brake in the first half of the cast and weaken it in the second half, resulting in a brake setting that is ideal for long-distance casting, with a light start and extension in the second half of the cast.
In addition, the release performance of the TWS means there is less resistance in the line guide, so there is less backlash immediately after casting.
For normal use, half the mag dial (scale 10) can handle a certain amount of lure.
When lowering the value below half (scale 10), be sure to lower it one scale at a time. Please note that if you suddenly lower the mag dial value too much, backlash will occur. Of course, you can further lower the brake (use a smaller scale) by using thumbing in combination.
When using a heavy fluorocarbon line, it is more comfortable to use a mag dial scale higher than the setting value for the PE line.

Φ34mm super duralumin spool
High strength and lightweight super duralumin spool. The 20HRF® PE SPECIAL is equipped with a Φ34mm spool diameter.

Super Metal Frame & Side Plate (Gear Side)
Super Metal (AL), which has overwhelming rigidity compared to resin frames, prevents the frame from warping or shaking under high loads such as when fighting a fish. The angler's power is transmitted without loss, allowing for smooth and powerful winding.

High-speed level wind
The trouble of the line being loosely wound on the reel is particularly noticeable when using thick fluorocarbon or PE lines. High-speed level wind drastically reduces such trouble. As a result, the trouble of the upper line digging into the lower line on the winding surface is greatly reduced, resulting in comfortable fishing performance.

Tough and rigid clutch system
A precise and durable clutch system.

Power Round EVA Knob Type (S-size knob compatible)
A long power round EVA knob type is used to ensure that it is easy to grip, does not impair the finger grip, and is difficult to slip out.