ABU GARCIA Roxani Powershooter

Cutting edge design, equipped with a power handle! A power fishing model equipped with a deep spool that inherits the genes of REVO. The sturdy durametal frame firmly supports the internal mechanism, and the salt shield pinion BB makes it suitable for a wide range of uses from fresh water to salt water. The deep spool's 20lb-100m line capacity is suitable for bass and rockfish with large plugs.

Durametal Frame
The aluminum frame is designed to be lightweight without compromising strength.
The material is designed for tough use in saltwater.

Infini Brake System
The new ROXANI is equipped with an Infini Brake System with 10 magnets and 4 centrifugal brake blocks.
The brake settings are suitable for everyone. Casters who prefer centrifugal brakes can set the centrifugal blocks to be stronger.
Casters who prefer magnetic brakes can set the magnetic brakes to be stronger, allowing you to freely adjust the feel you like.
Of course, by using them together, you can cast in any wind conditions.
The centrifugal brake has two weight settings. Blue is a stronger setting, and white is a weaker setting.

High-durability Dura Gear Brass Gear & High-strength Brass Gear Shaft
To handle big fish, high-strength brass gears are used for the drive system. 
A high-strength brass gear shaft is used for the support shaft.
Designed for forceful power winding.

Backup ratchet
By using not only a one-way bearing at the base of the handle, but also a ratchet-type backup ratchet, it is prepared for the unlikely event of a large object.

Dura Clutch
The operating parts have been thoroughly redesigned to make the clutch easier to disengage and more durable.

φ35mm forged aluminum deep spool
When fighting big fish, it is essential to stock thick line.
A φ35mm high-strength forged aluminum spool is used to ensure a daily line capacity of 20lb-100m.
In case you want to use 16lb-100m, a guide line is set on the side of the spool.
You can make the most of the speed benefits of the largest spool diameter.

Recessed reel foot
The split reel foot pushes the spool downward, making it possible to achieve a lower profile.
The height from the foot is approximately 40mm. It provides comfortable palming performance.

Carbon Matrix Drag & Drag Clicker
Abu Garcia's unique carbon matrix drag washer allows you to apply higher drag force while maintaining smooth performance over a wide range.
By introducing the clicker, you can grasp the speed extracted from the drag and be aware of line breaks while handling the lure.

Lightweight EVA middle round knob & 95mm long 4mm thick crank handle arm
The 95mm long 4mm thick aluminum crank handle is equipped with a round type EVA knob.
It can handle the aggressive fight of big fish.

Lure Keeper
Equipped with a lure keeper that is useful for moving to small places.
You can hook your claws on the protrusions and pull it out.
At the same time, if you pass the line through the half-moon hole and store it, it functions as a line keeper when storing it.

Salt Shield TM Pinion Bearing
By adopting a newly developed ball bearing with a water-repellent coating applied to the entire inside and outside, we have drastically reduced the salt jamming phenomenon that causes abnormal rotation noise.
We have succeeded in significantly improving the rotation feel and durability.
We adopted it on the pinion gear part, which is the part of a spinning reel that is most likely to retain salt crystals.