SHIMANO 25 Stella SW 14000XG

The Stella SW, which has a long track record both in Japan and overseas, has been redesigned with a number of new technologies. It offers further advantages, such as improved drag performance with XX Tough Drag, improved castability with Infinity Loop, improved gear strength and durability with Infinity Cross, and prevention of line trouble with Anti-Twist Fin. In addition, every detail has been improved, such as the addition of a waterproof seal to the handle knob and a larger diameter drag knob. The new Stella SW has been unleashed with even more refined performance to face off against large fish in the saltwater scene.

XX TOUGH DRAG - Double X Tough Drag
Drag durability has been further improved

Each drag part that withstands the fierce running is made of metal and abrasion-resistant carbon washers made exclusively for Stella SW. In addition to the drag washers that were previously placed at the bottom, the spool structure has been improved to allow for larger washers to be installed at the top.
This evolution has improved drag durability.
Thanks to the evolution of the drag structure and the synergistic effect of the heat sink drag, we have succeeded in reducing the loss of drag force due to heat by approximately 30% compared to the previous model.

INFINITYLOOP
A thoroughly designed oscillation system for SW

This technology improves the casting distance, casting feeling, and drag smoothness by winding the line methodically and precisely. There are three notable focus points. The first is the optimal winding pitch for SW models. This model is wound densely, with the pitch narrowed to about half that of the previous model. It provides a smooth casting feel and thoroughly suppresses line trouble. In addition, the dense winding reduces the number of times the line moves up and down when the drag is activated, allowing for smooth release.

The second improvement is the shape of the line wound around the spool. By reviewing the turning angle of the worm shaft, the bulges that tend to form on both the top and bottom ends of the spool have been made flatter, reducing resistance when releasing the line and dragging, and also reducing problems.

And the third is the 2-speed oscillation system, which changes the winding pitch when the spool moves back and forth. When the line is released from the spool ring side to the skirt side (downward), the finely wound line reduces release resistance and increases casting distance, while in the opposite direction, the coarsely wound line prevents the line from getting caught at high drag. This well-thought-out mechanism for a SW model further improves line release performance and reduces trouble.

INFINITYXROSS - Infinity Cross
The heart of the SW, the gear, has improved strength and durability

Advances in gear tooth design and manufacturing technology have expanded the contact area between the drive gear and pinion gear with Infinity Cross. By distributing the load on the gear teeth, damage caused by concentration of damage is prevented and durability is improved. The NEW Stella SW has increased this tooth width by approximately 1.3 times compared to the previous model. It is now possible to maintain a smooth gear feeling even when winding with a higher load.

ANTI-TWIST FIN - Anti-twist fin
Suppresses unpleasant line troubles

The fins are placed close to the line roller to reduce line slack and prevent the line from falling onto the spool skirt. The fins are made of elastic material to prevent damage when winding the knot.
Fin B, which creates a gap as before, is also included.

AR-C spool

The AR-C spool has a special shape for the spool ring, which creates a line streamlining effect, helping to reduce line trouble and improve long-distance casting performance. The 25 Stella SW is equipped with a new AR-C shape that improves the spool ring collar to make it less likely for the line to ride on it, reducing the line strangling the spool, which can cause line trouble.

In addition, in SW fishing, the spool ring is subjected to more stress than you can imagine under harsh conditions. The surface of the spool ring is coated with a strong abrasion-resistant barrier coat, further improving durability. It also reduces damage to the line, and the surface condition remains smooth and less susceptible to scratches for a longer period of time.

If the ring surface is damaged, you can replace the ring only. *Shimano after-sales service

X PROTECT & X SHIELD
Ironclad waterproof construction

The biggest threat to SW fishing is seawater intrusion. Seawater that gets inside the reel corrodes the metal parts and significantly reduces the initial performance.

Stella SW is sealed in various places, including the body, drag knob, and line roller, to prevent water from entering. In particular, the body and stopper parts have achieved IPX8 waterproofing standards. This provides high reliability and durability for SW games played under harsh conditions.

In addition, the waterproof structure has been revised to provide a lighter rotation performance while still maintaining waterproof performance. This achieves the contradictory elements of high waterproof performance and silky rotation.

The handle knob also has a waterproof structure

Newly designed drag knob for improved operability

The Stella SW has been improved in detail with a drag knob that is 25% larger in diameter to further improve operability. This not only makes it easier to grip the knob for quick operation, but also makes it easier to make fine adjustments. This provides an advantage when tightening or loosening the drag instantly when a large fish is hooked.

The performance we aim for with Infinity Connect is "ultimate casting performance"

The new Stella SW was designed to be perfectly matched with the new Ocea Plugger Limited and Ocea 17+PE, based on Shimano's Infinity Connect concept. The combination of these reels, rods, and gears, developed as systematic products, significantly improves the overall casting performance, providing anglers with three benefits: improved casting feel, improved casting distance, and improved line strength maintenance. The acceleration of the entire tackle vector provides an additional advantage in offshore casting.

Stella SW dedicated after-sales service program

To allow you to use the 25 Stella SW with peace of mind for a long period of time, we have prepared an after-sales service program exclusively for the 25 Stella SW.

X-Rigid Rotor
By using aluminum alloy and verifying the thickness arrangement in detail through repeated 3D analysis, we have achieved even stronger rigidity, durability and excellent rotational balance than ever before. This high rigidity also contributes to improving the functionality of the drag and other parts.

X-Rigid Handle
A high-rigidity cold-forged handle made exclusively for Stella SW that transmits the angler's power without any loss.

Highly rigid arm cam
To increase rigidity, the arm cam is made of metal, just like the rotor. It transmits the power of the Stella SW without distortion when winding the line under high load or when dragging. The metal plating process maintains a smooth surface for a long time. It reduces damage to the line.

Stella SW dedicated line roller
The surface is treated with DLC (Diamond-Like Carbon) to reduce friction and prevent line wear. It also has a contact-type waterproof seal that blocks seawater from entering the line roller. It protects the internal bearings from harsh environments and is more than 10 times more durable than models without it. *Based on our comparative tests.

Line roller loosening prevention mechanism
The line roller, which is the first to receive the pull of a large fish and receive the force, is equipped with a mechanism to prevent loosening. To make the bolts that secure the line roller even more difficult to loosen, they are doubly fixed with set screws.

CI4+ handle knob (excluding 14000)
The handle knob is made of CI4+ carbon material, which is both highly rigid and lightweight.
(The 14000 model uses a lightweight hollow oval round knob.)