DAIWA Crystia Wakasagi CRT R #Solid Black / Blue Gradient

Significantly improved speed and battery life! Standard model with "shelf stop" function. Further evolution of basic performance!

Basic performance upgrade
Equipped with a "new microcomputer control system" with better rotation efficiency, battery life is about 2 times longer / winding speed is about 1.2 times faster.

Power mode / Eco mode selection
Eco mode is equipped with a "new microcomputer control system" that extends battery life. In power mode, current is constantly flowing to the motor and the brake is applied, allowing for more powerful winding under high load such as heavy weights and long tips.

Upgraded with the addition of new convenient functions
1. Water depth counter correction. 2. Deceleration speed adjustment for stopping the gunwale deceleration switch. 3. All settings reset

V spool
Equipped with a "V spool" that allows the line to be wound evenly with its "V" shape and allows smooth line release when the rig falls. The spool has excellent rotation performance, so even light rigs can be smoothly dropped without getting caught.
*The photo shows a resin spool.

Quick winding Continuous winding
Press the winding switch on both sides of the body to wind up the line a little = "quick winding" function. If you press and hold it for more than one second, it will become "continuous winding" and winding will continue even if you release your finger. To stop winding, press the switch again.

Line stopper
Equipped with line stoppers in three places on the top of the spool. This is a convenient function that automatically stops the rig at the same depth every time you drop the rig by hooking the line on the stopper at the depth where you often get bites (the depth where the fish swims).

Boat side stop guide
The switch-type boat side stop prevents the tip from getting tangled up due to over-winding the rig.

Clutch lever
When the lever is tilted to the right, the clutch is "free" = the spool is free and the line can be released. When the lever is tilted to the left, the clutch is "locked" = the spool is locked and you can wind it up. (The spool can also be locked by pressing the winding switch on the side of the body.)

Compatible with 5mm tips
Tips with a diameter of 5mm can be attached. Insert the tip all the way into the mounting hole and make sure it is securely fixed. (It may loosen due to vibration, so please check it from time to time during use.)

Butt rope mounting hole
It is reassuring to attach a butt rope in case of a fall.

Large characters, large switches
Large characters and large switches make it easy to see and operate. In addition, since it is a large panel, the "Master" and "Shelf Stop" displays are also displayed on the LCD panel, so you can see the currently set functions at a glance!