NISSIN Zerosum Iso Tamanoe X4 5005

Wear 4-axis carbon for the whole body.

"To decide the last moment brilliantly" ... Inheriting the concept of the ZEROSUM Tamanoe series, completed as a coordinated model with the X4 series, the pattern of the highest peak ball. Highly elastic carbon blanks used generously ... The whole body is wrapped in high-density 4-axis carbon that makes it possible to draw out the blank potential to the utmost limit, achieving high controllability, tension and rigidity, smooth operability and approach. We are proud of the performance. In addition, the R-shaped mouthpiece ring that prevents the mouth from chipping, the lower plug II that thoroughly reduces air resistance, and the anti-sticking process are all set with an emphasis on approach. The handle of the X4 series ball is completed to prevent unexpected troubles and contribute to smooth uptake.

■ High-density 4-axis carbon (# 1 ~ BAT)

■ Air-through design (bamboo shoot design)
■ Anti-sticking processing

■ Hand processing to reduce sticking
■ Anti-slip treatment (grip)

■ Air-through lower plug

■ Stainless steel socket

■ R-shaped base ring (# 2 ~ BAT)

■ With belt with can

High density 4-axis carbon : 

4-axis carbon with higher elasticity and higher density than conventional 4-axis carbon. The force in the twisting direction, which greatly affects the speed of shape restoration, is further effectively suppressed, the energy loss of the blank is minimized, and the straightness and transmission of the blank are improved. Furthermore, it has become possible to draw out the blank potential to the utmost limit, contributing to all parts such as swinging, sensitivity, flight distance, casting accuracy, rod shake, and operability at the time of capturing.

Each section R shape base ring : 

In order to prevent the mouth from chipping and improve the swingability, a mouthpiece ring with an outer surface R shape that suppresses interference with the inner surface of the rod is used. The conventional R-shaped base has been further evolved to make the surface less likely to corrode and scratch.

Air-through bottom plug II / air-through design : 

Thoroughly reduce air resistance during swinging. A total of 8 large-diameter air holes are machined, and a mesh guard is attached to the bottom to reduce the suction of foreign matter. In addition, assuming use on a hard rocky shore, a large rubber is used for the rod butt, and a large rubber is used inside the lower plug to prevent scratches on the bottom of the knot when it is stowed.

Anti-sticking processing (all sections) Adopting hand processing to reduce sticking : 

Adopted a structure to prevent sticking at the time of swinging at all mating parts. In addition, the mating part is aligned by the craftsman's hand, and by adding subtle irregularities, adsorption is further reduced. Overwhelmingly prevents sticking troubles during swinging. Reduces stress.

Stainless steel socket :