DAIWA Silver Wolf SV TW 1000XH PE Special

Black porgy is very cautious and sensitive.
It goes without saying that a thin line with a long casting distance is advantageous because it is less likely to be noticed by black porgy.
Thin lines also reduce water resistance, which is an advantage in the current.
Not only does a free rig (commonly known as a free rig) not easily get swept away, it also reduces the rig's unintended movement due to water resistance, but the sinker can be made lighter, which prevents it from getting caught on the bottom and creates a natural lure action, allowing for more natural fishing.
So is a traditional spinning tackle better? The answer is no.
The latest chinning is a fishing method in which you search by reeling the surface and cast with high response. Bait tackles are by far more advantageous in terms of handling, sensitivity, and responsiveness.
However, only a bait reel that does not induce problems such as backlash or high breakage even in the special situation of thin PE can enjoy these benefits. To master chinning, a new weapon that opens up new territory is essential.

HYPERDRIVE DESIGN
The next-generation design concept for bait (double-axis) reels, which significantly improves the standard of all basic performance with the aim of maintaining high initial performance for a long time. The Hyper Drive Design is composed of up to four technologies. Hyper Double Support, which requires the Hyper Drive Digigear to maintain smooth rotation for a long time and assists the gear drive to provide strong and light winding. Hyper Armed Housing, which strongly supports the internal structure and is less likely to bend or distort. Hyper Tough Clutch with an insulating structure that continues to operate even in harsh locations and drastically reduces adhesion due to salt. The synergistic effect of these technologies continues to provide stable performance in any field.

HYPERDRIVE DIGIGEAR
A newly designed gear system that pursues sustained strong and smooth rotation. This is DAIWA's unique technology that achieves an increased meshing rate without reducing the module (size) of the gear teeth, which directly affects durability, allowing the initial smoothness to be maintained for a long time.

HYPER DOUBLE SUPPORT
A drive support system that achieves sustained smoothness and strong, light winding. Both ends of the pinion gear are supported with two ball bearings with high precision, allowing for strong, light winding even under load without attenuating the input from the handle.

HYPER ARMED HOUSING (FULL AL)
A housing system that firmly supports the internal structure with high rigidity and precision, producing a precise winding feel and power. The use of metal materials for the frame, which is the essential condition, makes it possible to continue to exert basic performance for an even longer period of time by combining it with side plates and set plates.

HYPER TOUGH CLUTCH
Not only does this clutch system have crisp on/off performance that continues to slide thousands or tens of thousands of times, but it also has extremely few problems even in highly saline seawater. This cutting-edge insulation structure has already reduced the number of repairs due to sticking in harsh saltwater environments by 99% compared to our previous model.

TWS (T-WING SYSTEM)
TWS has succeeded in significantly reducing the resistance of the line guide close to the spool, where the spool rotation speed is the highest. By reducing the resistance to the casting distance, not only is the casting distance and controllability improved, but the fall is also faster and backlash is reduced. This has realized the possibility of a new level wind not only when winding, but also when casting.

UTD (Ultimate Tournament Drag)
This is a Daiwa drag system that eliminates the initial bite when the drag first starts working, achieving a smooth drag without stickiness (unevenness), while also providing maximum drag power the more you tighten it.

ZERO SHAFT
The spool is only supported by the bottom bracket. The shaftless design eliminates excess resistance and provides ideal spool rotation.
In other words, it is the key to a high-output engine that prioritizes casting performance.

Zero Adjuster
First, adjust the "zero adjuster" and set the "zero spool rattle". Thanks to the evolution of the magnetic brake, it is now possible to control all lures with just the mag dial.
The "zero adjuster" is a mechanism that allows you to enjoy fishing comfortably without malfunctions while fishing by adjusting it to the "zero setting" before starting fishing.
*The "zero spool rattle" setting is the setting that does not push the spool while leaving a slight rattle (about 0.2 mm).

MAGSEALED
DAIWA's unique waterproof structure creates a wall of magnetic mag oil in the gap between the body and rotor to keep out seawater, dust, etc.

SV BOOST SYSTEM
The biggest feature of the BOOST mechanism is the inductor rotor that pops out in two stages.
SV BOOST maintains the trouble-free nature of the SV concept, while instantly applying two stages of optimal braking force according to the spool rotation speed, leading to an extra stretch in the latter half of the cast. This system is now born, which excels in long-distance casting performance while maintaining comfortable performance.
When casting, the initial backlash zone is instantly controlled by exerting maximum braking force, and then the braking force is reduced in two stages from the middle to the latter half to achieve an extra stretch in the latter half.

φ34mm G1 duralumin SV BOOST spool for PE
Equipped with a spool made of G1 duralumin, a material that is approximately 1.3 times stronger than the extra-duralumin used for spools as a high-strength material. This aims to create a spool that is lightweight yet strong.
*PE-only spool: Since it is designed to be set up with PE lines, nylon and fluoro lines cannot be used as they stretch the line significantly and damage the spool strength.
*The half line can be used as a guide when winding the line. The half line is #0.6: 90m #0.8-75m.
*Recommended winding amount: 0.6/0.8-150m + leader. Recommended lure weight: 3.5g-28g (center is 5-14g free rig, plug, etc.)

Drag pull click
The drag pull click is a mechanism that makes a clicking sound when the line is pulled out during a fight with a fish, so that the drag operation can be determined by the sound.
When fighting with line tension at its limit, being able to determine the drag operation by sound is a great advantage for anglers.
This is an essential function, especially when fishing with thin PE line.

High-speed level wind
When using PE line, problems that occur when the line is loosely wound on the reel are particularly noticeable.
High-speed level wind dramatically reduces such problems.
As a result, the problem of the upper line digging into the lower line on the winding surface is greatly reduced, resulting in comfortable fishing performance.