DAIWA Power Holder CP160CH Red

Easy to install with one-touch bolt stopper, rod holder that can be firmly fixed with two legs

• Compact and lightweight (about 30g) compact clamp head CH30G is standard equipment
• Easy to put on and take off with one-touch bolt stopper structure
• Haste system
• 180 ° swing function
• Vertical / horizontal attachment possible
• Slide vise

Installed function (The shape of the rod receiving part in the illustration is different, but the function is the same)

■ Haste system

The structure that the holder part tilts forward with the haste lever. By minimizing the bending of the rod, it prevents thread entanglement and backlash on the guide, and enables high-speed gimmick fall.
* The haste system cannot be used with the horizontal attachment.

■ 180 ° swing 

Swing left and right 90 degrees each (5 steps each) is possible, and the direction of the rod can be changed freely.

■ Vertical / horizontal attachment switchable

Vertical / horizontal attachment is possible with one-touch attachment / detachment according to the shape of the ship.

■ One-touch bolt stopper

You can move the bolt up and down by pushing the bolt stopper to release it, so you can quickly install and remove it.

Compact clamp head CH30G

• Lightweight clamp head with a weight of about 30g.
• Compact and excellent operability. Since there are no protrusions such as screws on the surface, the lines are less likely to get entangled and the sides are less likely to hurt.
• The resistance at the time of mounting is about half that of the conventional clamp head, and it is easy to mount on the clamp receiver.

【set content】

• Clamp head 4 sizes (SS / S / M / L) x 1 each
• Clamp table x 1
• Clamp tightening screw x 1

Compact clamp head CH30G compatible rod diameter

size	Corresponding rod diameter (holder lock part) (φ)
SS	About 11.0 to 15.0
S	About 14.5-19.0
M	Approximately 18.5 to 23.0
L	About 22.5 to 27.0