TENRYU U-40 Dura Gloss LS Supreme (1oz+1oz)2oz Set

• Use: Rod Wrap Finish (coating wrapped thread)
  • Stir the same amount of resin and hardener for 2 minutes, and leave the mixed liquid for 1 or 2 minutes, then use the mixed liquid in approx. 30 minutes after the mixture.
  • Time for LS Supreme to cure depends on temperature, but generally, it cures tack free in approx. 4 hours, it cures enough to use the rod in approx. 24 hours, then it completely cures in 5 days.
  • When re-apply LS Supreme, it would be the best to do within 48 hours after 1st layer of LS Supreme cures. However, when re-applying after 48 hours pass, please do it after scratching surface with something like aluminum foam.

Cautionary Notes

• It is the best to mix resin and hardener in dust-free room, 20-24 degrees C in temperature. When temperature changes by 7-8 degrees, curing time changes in nearly double. When mixing under the temperature of below 21 degrees, please use LS SUPREME after warming epoxy resin bottle with lukewarm water for approx.10 minutes.
• Do not warm hardener.
• Mix resin and hardener at least 3cc for each, and wipe off the mixed liquid with brush cleaner.